| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Couple of questions http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24872 |
Page 1 of 1 |
| Author: | JSDenvir [ Thu Dec 03, 2009 9:49 am ] |
| Post subject: | Couple of questions |
Okay, so I'm not even finished my first and I'm thinking about the second, but here goes anyhow. If I'm making an all-mahogany guitar, any thoughts regarding top thickness? And question #2. Does anybody have any experience with the edge vise from Luthier Tool? http://www.luthiertool.com/edge%20vise.html As always, thanks in advance. Steve |
|
| Author: | Michael Dale Payne [ Thu Dec 03, 2009 9:59 am ] |
| Post subject: | Re: Couple of questions |
JSDenvir wrote: Okay, so I'm not even finished my first and I'm thinking about the second, but here goes anyhow. If I'm making an all-mahogany guitar, any thoughts regarding top thickness? Each top is different but .115 is a agood starting point back and sides are .095-.100 for back and .09-.85 for sides JSDenvir wrote: And question #2. Does anybody have any experience with the edge vise from Luthier Tool? http://www.luthiertool.com/edge%20vise.html As always, thanks in advance. Steve This is basicly just an interchangable routing timplate holder for cutting end grafts. I made nine out of plt and a couple of 1/4"-20 screws. I do have experiance with Lutherstools. They make well designed and well machined jigs and fixtures. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|