| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| looking for CNC 14 fret 25.4 1.75" neck http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24834 |
Page 1 of 1 |
| Author: | sprouseod [ Mon Nov 30, 2009 11:36 am ] |
| Post subject: | looking for CNC 14 fret 25.4 1.75" neck |
I am helping a friend build an OM. I had planned to use the B stock from Martin's Guitarmakers Connection but it is difficult to find them. Does anyone have one or two they want to part with, they don't have to be perfect. Or can you recommend someone who makes them? thanks Richard |
|
| Author: | SteveCourtright [ Mon Nov 30, 2009 11:43 am ] |
| Post subject: | Re: looking for CNC 14 fret 25.4 1.75" neck |
Richard, John Hall, one of our sponsors (Blues Creek Guitars), might be able to provide a neck from his Martin stock. John Watkins makes them and often has some he will part with discounted for various reasons: http://www.cncguitarparts.com/ Also, the guys here make some lovely necks: http://www.hanalei-moon.com/ |
|
| Author: | Michael Dale Payne [ Mon Nov 30, 2009 11:47 am ] |
| Post subject: | Re: looking for CNC 14 fret 25.4 1.75" neck |
sprouseod wrote: I am helping a friend build an OM. I had planned to use the B stock from Martin's Guitarmakers Connection but it is difficult to find them. Does anyone have one or two they want to part with, they don't have to be perfect. Or can you recommend someone who makes them? thanks Richard Actually it is the most common CNC neck made. Watkins CNC parts, LMI, Stewmac 25.4 scale 1.75 nut is their most common CNC neck. Hanalei Moon makes great hand machined necks as well |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|