Hi
I have been busy working on the OM wedge and a 000 12 fret. Here are a few pictures, I will glue the back on tomorrow.
Fred
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bubinga OM Wedge progress http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24786 |
Page 1 of 1 |
| Author: | Fred Tellier [ Thu Nov 26, 2009 9:32 pm ] |
| Post subject: | Bubinga OM Wedge progress |
Hi I have been busy working on the OM wedge and a 000 12 fret. Here are a few pictures, I will glue the back on tomorrow. Fred |
|
| Author: | Ti-Roux [ Thu Nov 26, 2009 9:54 pm ] |
| Post subject: | Re: Bubinga OM Wedge progress |
I Love bubinga! And the simplicity of your rosette, I think that simple rosettes are giving as much look as a very complex one, if you choose good color |
|
| Author: | Ken C [ Fri Nov 27, 2009 12:09 am ] |
| Post subject: | Re: Bubinga OM Wedge progress |
Nice stuff, Fred! I still say you are a crazy man doing a bubinga cutaway!! Ken |
|
| Author: | MaxBishop [ Fri Nov 27, 2009 8:35 am ] |
| Post subject: | Re: Bubinga OM Wedge progress |
Hi Fred, That's going to be a great guitar! I can't wait to see what it looks like with finish. Keep up the good work. Max |
|
| Author: | Fred Tellier [ Fri Nov 27, 2009 8:53 pm ] |
| Post subject: | Re: Bubinga OM Wedge progress |
I closed the box today, and the wedge feels real good under my right arm. I will have the 000 12 fret ready to glue on the top tomorrow after I entertain the grand daughter at the Santa parade. Gluing up a wedge back in a gobar deck is quite interesting as you need to match the back angles with the top of the deck or have several different lengths of gobars. I go for the angled deck top, the guitar in the mold sits on the 28' radius dish in the gobar deck then the the back is clamped up with lots of gobars. Fred |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|