| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 2A Lutz Packages http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24672 |
Page 1 of 2 |
| Author: | Shane Neifer [ Thu Nov 19, 2009 11:37 am ] |
| Post subject: | 2A Lutz Packages |
In anticipation of some new logs becoming avaialbe I am offering 2A Lutz Spruce Top Sets in packages of 10 for $200 USD per package. I need space for the new wood and more money means that I can get more of this high quality wood. The beauty of this deal is that once this wood is gone, the prices are going up and these sets, in packages of 10, will be $280 USD (my prices have not changed since 2006). All of the tops will be sawn from two trees, here is a sample set from each: Attachment: Clore.jpg Attachment: Skeena West.jpg These trees have been down for about two years. There will likely be some colour in many (maybe even most) of the sets and the usual 2A stuff, like some knot shadow and the like, but there will also be some sets that are pretty close to 3A as well. So here is the deal, I will start to process these sets in two days. I will then finish dry them for a few days and start to package them. That could take up to 4 weeks or so (if it is longer I will let you know). I will have 40 or 50 of these packages available and I am advertising them on this Board and on the ANZLF and LuthierCom. It will be first come first served. But I am looking for payment in advance on this deal and that secures your place in the queue. The terms are $200 for the wood, shipping is another $32 by post to the USA (other destinations will vary). Once shipped from here it takes about 2 weeks to arrive (in the US). Payment is either by paypal to my e-mail address, shane@highmountaintonewood.com, or you can pay by visa or mastercard by e-mail or phone. Once I have your sets ready to ship, they will ship and I will send you an e-mail confirming they are on their way to you. So be sure I have your shipping address and e-mail address. I hope this a great deal for all! Thanks Shane |
|
| Author: | Arnt Rian [ Thu Nov 19, 2009 12:23 pm ] |
| Post subject: | Re: 2A Lutz Packages |
I'm broke and I have lots of tops, so I won't be jumping on this one. For everyone else... Shane grades his tops very conservatively, and I bet many if not most of these tops would get a couple of more A's from some vendors. Highly recommended! |
|
| Author: | Alexandru Marian [ Thu Nov 19, 2009 12:37 pm ] |
| Post subject: | Re: 2A Lutz Packages |
ditto |
|
| Author: | DannyV [ Thu Nov 19, 2009 12:57 pm ] |
| Post subject: | Re: 2A Lutz Packages |
What's the deal? Is that Shattered Glass or Fuzzy Bear Lutz? Couldn't resist. Check out "tonewood" on EBay. How wide are they Shane? If you can throw in a few that are a least 8 1/2" I'm in. Danny |
|
| Author: | Burton LeGeyt [ Thu Nov 19, 2009 1:04 pm ] |
| Post subject: | Re: 2A Lutz Packages |
I'm in for one Shane. I will pm you for payment details etc.... Thanks for doing this! For anyone wondering about quality and price, there really is no comparison I don't think. I had ordered 20 sets for work about a year ago and some of them were amazing tops in every way. Not one of them was a dud. Here is a guitar built with the packing wood from my first purchase with Shane. By packing wood I mean the wood used to pack around the wood I paid for. Crazy. Todd posted a similar photo a while ago: Attachment: cl-compressed.jpg
|
|
| Author: | BobK [ Thu Nov 19, 2009 1:29 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane, I just sent you a Paypal for 1 package. Thanks, BobK |
|
| Author: | ChuckH [ Thu Nov 19, 2009 1:49 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane, I'll take a set of 10 if you don't mind. Hutch |
|
| Author: | Shane Neifer [ Thu Nov 19, 2009 2:00 pm ] |
| Post subject: | Re: 2A Lutz Packages |
I've a couple of questions on dimensions. They should all be 22 x 8.5 x .1875. They are rough sawn when shipped but take very little to clean up. Thanks Shane |
|
| Author: | Corky Long [ Thu Nov 19, 2009 2:59 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Wow - Great testimonials from the group - and Burton's picture guitar is stellar - expecially if that's your "scrap" ! I'm in for one set of 10, Shane. Been wanting to try our your Lutz for awhile. I guess that's my Christmas present to myself.  You should have my Paypal payment now. Regards, |
|
| Author: | Bob Long [ Thu Nov 19, 2009 3:27 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Count me in Shane! I'll Paypal you now. Many thanks! Bob Long |
|
| Author: | gozierdt [ Thu Nov 19, 2009 4:01 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane, I'm in for one set of ten also. Paypal coming in a couple of minutes Thanks |
|
| Author: | StevenWheeler [ Thu Nov 19, 2009 4:44 pm ] |
| Post subject: | Re: 2A Lutz Packages |
And one set for me also. Pay Pal on the way. Don't tell my wife! Steve |
|
| Author: | Hank Mauel [ Thu Nov 19, 2009 5:53 pm ] |
| Post subject: | Re: 2A Lutz Packages |
One package here, please. Dang, it's nice to have a "company credit card"!  PM sent |
|
| Author: | KMartin [ Thu Nov 19, 2009 6:38 pm ] |
| Post subject: | Re: 2A Lutz Packages |
One package for me as well -- PayPal payment sent. |
|
| Author: | Ken Franklin [ Fri Nov 20, 2009 12:14 am ] |
| Post subject: | Re: 2A Lutz Packages |
Count me in for a 10-pack. |
|
| Author: | Mike OMelia [ Fri Nov 20, 2009 12:31 am ] |
| Post subject: | Re: 2A Lutz Packages |
If you are new to Shane's products, I would like to add you can trust him to send you the best, and normally better than you expect. He lives a LONG way from us in the lower 48, so be patient with the mail service. It always gets here. I might also add that it would behoove you to purchase some of his rough brace stock. I love the stuff, carves and shapes like butter. Great tonal qualities. I do notknow how much he promotes that, I just ask him to send me several pounds of the stuff when I need it. You will love working with his Lutz. Thanks Shane, you are a great OLFer! Mike |
|
| Author: | Jim Kirby [ Fri Nov 20, 2009 11:51 am ] |
| Post subject: | Re: 2A Lutz Packages |
Shane - I'd like a 10 pack too, and some bracewood too. I'm sending a separate PM about that. Jim |
|
| Author: | Bill Greene [ Fri Nov 20, 2009 12:43 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane: What's the scoop on the bracewood? One can never have too much bracewood.  And I just sent you a Paypal to get in on the deal. Thanks. Bill |
|
| Author: | Shane Neifer [ Fri Nov 20, 2009 12:49 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Bill Greene wrote: Shane: What's the scoop on the bracewood? One can never have too much bracewood. How much ya want? I have some ready to go and will be cutting a bunch more. Shane |
|
| Author: | Matthew Jenkins [ Fri Nov 20, 2009 1:39 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Paypal sent!! Mat |
|
| Author: | jaguarguy [ Fri Nov 20, 2009 2:53 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane - Paypal payment sent for 1 set of 10 tops. Mike |
|
| Author: | Mike Collins [ Fri Nov 20, 2009 3:04 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Shane; any chance of swapping some CNC collets for some tops?  Mike |
|
| Author: | Shane Neifer [ Fri Nov 20, 2009 3:46 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Mike Collins wrote: Shane; any chance of swapping some CNC collets for some tops? Mike You have my collets so you have me by the short and curly's! !Shane |
|
| Author: | truckjohn [ Fri Nov 20, 2009 5:27 pm ] |
| Post subject: | Re: 2A Lutz Packages |
Please put me on the list as well. I will send Paypal when I get back in town on Tuesday. Thanks John |
|
| Author: | Wade Sylvester [ Fri Nov 20, 2009 5:45 pm ] |
| Post subject: | Re: 2A Lutz Packages |
This was how I got some of Shane's Lutz about three years ago.. Thanks for doing this Shane! I'm in for a 10 pack. Wade |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|