| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| KTM-SV Application http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24649 |
Page 1 of 1 |
| Author: | Steve Sollod [ Wed Nov 18, 2009 2:32 pm ] |
| Post subject: | KTM-SV Application |
I have built 4 guitars and have used z-poxy to seal and fill pores and Tru-Oil as a finish. The TO is okay but I'm looking for alternatives. I've heard good things on the OLF about KTM-SV and I'm wondering if I should try it on number 5 that I'm completing the build on. I have some limitations in my finishing choices. My shop is in the garage, do not have spray equipment or place to spray, and I have done the finishing in the past in my spare bedroom as conditions are not favorible in my garage. So, I have some questions about KTM-SV... 1) Can I wipe or brush on KTM-SV and if so, do I need to thin the product and how do I do that? 2) Can I use it in my spare bedroom without risking my life or iritating my wife (...smell or hazardous material)? 3) Can I use it over z-poxy? Thanks for the help. Steve |
|
| Author: | Laurent Brondel [ Wed Nov 18, 2009 3:49 pm ] |
| Post subject: | Re: KTM-SV Application |
You have a long current thread about it: viewtopic.php?f=10101&t=22737 Waterborne does not mean there are no chemicals in the finish and solvents, nor that you should breathe or drink it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|