Official Luthiers Forum! :: View topic - Hartville Tool chisel sale

Narex chisels are made in the Czech Republic and are hardened to RC 59. The MHG chisels are made in Germany and are hardened to RC 61, just as the Two Cherries and Hirsch chisels are.

Hartville Tool also has a 100 piece set of rare earth magnets on sale (45 - 1/4", 30 - 3/8", and 25 - 1/2") for $15.98 (regular $39.99). Some folks have mentioned using magnets for jigs and clamping, so thought I would mention that as well.

Author:	Alan [ Sun Nov 15, 2009 12:26 pm ]
Post subject:	Hartville Tool chisel sale
If anyone is looking for a set of chisels at a good price, I was just at the Hartville Tool web site and saw that they had a nice 6 piece set of MHG chisels on clearance for $49.42 (regular $109.93). The set includes 6mm, 10mm, 12mm, 16mm, 20mm, and 26mm. They also have the individual chisels on clearance as well (around $8 to $10 each). http://www.hartvilletool.com/product/11749

Author:	John Lewis [ Sun Nov 15, 2009 8:28 pm ]
Post subject:	Re: Hartville Tool chisel sale
Those look like my Narex chisels from Highland Hardware.

Author:	Alan [ Sun Nov 15, 2009 8:56 pm ]
Post subject:	Re: Hartville Tool chisel sale
Narex chisels are made in the Czech Republic and are hardened to RC 59. The MHG chisels are made in Germany and are hardened to RC 61, just as the Two Cherries and Hirsch chisels are. Hartville Tool also has a 100 piece set of rare earth magnets on sale (45 - 1/4", 30 - 3/8", and 25 - 1/2") for $15.98 (regular $39.99). Some folks have mentioned using magnets for jigs and clamping, so thought I would mention that as well.

Author:	John Lewis [ Sun Nov 15, 2009 9:28 pm ]
Post subject:	Re: Hartville Tool chisel sale
Alan wrote: Narex chisels are made in the Czech Republic and are hardened to RC 59. The MHG chisels are made in Germany and are hardened to RC 61, just as the Two Cherries and Hirsch chisels are. Hartville Tool also has a 100 piece set of rare earth magnets on sale (45 - 1/4", 30 - 3/8", and 25 - 1/2") for $15.98 (regular $39.99). Some folks have mentioned using magnets for jigs and clamping, so thought I would mention that as well. If that is the case then $50.00 sounds like a bargain. Might have to pony up the $$.

Author:	MRS [ Sun Nov 15, 2009 11:59 pm ]
Post subject:	Re: Hartville Tool chisel sale
Thanks you just caused me $58.37. Thats with shipping for the chisels. I almost went for the magnets because i have a few ideas for them too. But i want something larger in size then them. thanks for the post...Mike

Official Luthiers Forum! http://www.luthiersforum.com/forum/

Hartville Tool chisel sale http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24602	Page 1 of 1

Author:	Jon L. Nixon [ Mon Nov 16, 2009 8:17 am ]
Post subject:	Re: Hartville Tool chisel sale
Pretty darn good deal.

Author:	Alan [ Fri Nov 20, 2009 9:12 am ]
Post subject:	Re: Hartville Tool chisel sale
I got the chisels in from Hartville Tool yesterday and was very pleased with them. They need to sharpen as most new chisels do, but they were very nice. In addition to the set of 6, I got a couple of spare 20MM and 26MM chisels, since those are the ones I use the most. This way, I will always have spare sharpened chisels on hand.

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/