| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Wood tuner Knob Source? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24536 |
Page 1 of 1 |
| Author: | FrankC [ Tue Nov 10, 2009 4:14 pm ] |
| Post subject: | Wood tuner Knob Source? |
A while back I remember visiting a website where the guy made wooden tuner knobs. Does anyone know the site I am referring to and can send me a link? I searched all day but either the site is gone or I just missed it somehow. |
|
| Author: | TonyKarol [ Tue Nov 10, 2009 4:34 pm ] |
| Post subject: | Re: Wood tuner Knob Source? |
I think bob garrish does .. saint lutherie.com maybe ... |
|
| Author: | Burton LeGeyt [ Tue Nov 10, 2009 4:49 pm ] |
| Post subject: | Re: Wood tuner Knob Source? |
I make the Waverly oval style for the Waverly, Gotoh, and Grover open back tuners. I have a really good selection in stock at the moment. I am planning on listing some in the Classifieds soon. Bob made me some in the 510 style a while back that were very nice and I think there is a selection on Charis' website also. Which ones are you looking for? |
|
| Author: | Ti-Roux [ Tue Nov 10, 2009 10:35 pm ] |
| Post subject: | Re: Wood tuner Knob Source? |
The better source is yourself  Grab a rasp, a file and a press drill... and go ahead ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Seriously, if you're making only few guitars a year, it's maybe a good idea to do it yourself, exactly like you want them... it's my opinion! Or check Ebay, there's a lot of very beautiful knobs. |
|
| Author: | LiquidGabe [ Wed Nov 11, 2009 10:52 pm ] |
| Post subject: | Re: Wood tuner Knob Source? |
I made some jigs this spring which let me knock out a set in about 30 minutes. The jigs were easy to put together. I put a tute up: http://luthiersforum.com/forum/viewtopic.php?f=10117&t=21888 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|