| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| spray gun tip sizes http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24521 |
Page 1 of 1 |
| Author: | dmorg57 [ Mon Nov 09, 2009 6:44 pm ] |
| Post subject: | spray gun tip sizes |
Hi all, I believe that this was just covered about a week ago or so, but for the life of me I cannot find it. I need an idea of what size spray needle I should be using for water based coatings for a Devilbiss finish line 3. Any assistance would be greatly appreciated. Thanks in advance, Dave |
|
| Author: | woody b [ Mon Nov 09, 2009 6:47 pm ] |
| Post subject: | Re: spray gun tip sizes |
1.3 should work great with most waterbased finishes. |
|
| Author: | dmorg57 [ Tue Nov 10, 2009 7:29 am ] |
| Post subject: | Re: spray gun tip sizes |
Woody, thanks for the info. Much appreciated, Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|