| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Radiused Templates http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24458 |
Page 1 of 1 |
| Author: | 000lover [ Wed Nov 04, 2009 7:29 pm ] |
| Post subject: | Radiused Templates |
Is there a pdf or something out there with a scale brace radius template you can print off? |
|
| Author: | Dave Fifield [ Wed Nov 04, 2009 9:43 pm ] |
| Post subject: | Re: Radiused Templates |
Hi Dr. Matthew, There isn't, as far as I know, because there doesn't need to be. You can make your own for no money on your computer. Download and install a trial copy of Corel Draw, then use it to draw whatever bracing curve template you want. Then print it. Voila! If you don't get how to do this, I will willlingly step up and draw one/some for you and then send you the pdf file/s, but I'd need to know what radius/radii you have in mind, and how long and wide you want the template/s. Obviously, I'd prefer to teach you how to fish.... Cheers, Dave F. |
|
| Author: | Bob Garrish [ Thu Nov 05, 2009 1:27 am ] |
| Post subject: | Re: Radiused Templates |
Dave Fifield wrote: Obviously, I'd prefer to teach you how to fish.... Cheers, Dave F. Build a man a fire and you keep him warm for the rest of the night-- set a man on fire and you keep him warm for the rest of his life. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|