| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| radius dish as solera http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24323 |
Page 1 of 1 |
| Author: | Hupaand [ Sun Oct 25, 2009 11:31 am ] |
| Post subject: | radius dish as solera |
Can you effectively use a radius dish as a solera? Say a 15'. |
|
| Author: | Kent Chasson [ Sun Oct 25, 2009 12:19 pm ] |
| Post subject: | Re: radius dish as solera |
Yes, that's pretty much what it is. 15' is more curve than most folks use for tops though. Also, make sure you understand the geometry of the neck/fretboard/bridge height before you dome the upper bout. There are many ways to treat it but one possibility is to dome everything but the UTB. Often that gives you the right geometry. |
|
| Author: | Hupaand [ Sun Oct 25, 2009 4:00 pm ] |
| Post subject: | Re: radius dish as solera |
How about 28'? Mostly flat above the sound hole? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|