| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Plans for Norman Blake 000-18 model http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24248 |
Page 1 of 1 |
| Author: | Richard Sutherland [ Mon Oct 19, 2009 4:18 pm ] |
| Post subject: | Plans for Norman Blake 000-18 model |
Are these available? Thanks. |
|
| Author: | Zach Ehley [ Mon Oct 19, 2009 4:32 pm ] |
| Post subject: | Re: Plans for Norman Blake 000-18 model |
John Hall should be able to get you a tracing with the brace locations. I've never seen full plans. |
|
| Author: | Fred Tellier [ Mon Oct 19, 2009 5:16 pm ] |
| Post subject: | Re: Plans for Norman Blake 000-18 model |
I got a tracing from John Hall and the bracing is basically the same as a standard 14 fret 000/OM with the bridge plate moved to the correct placement for the martin short scale and a 12 fret neck. My only concern was that the bridge was only above the X brace on its front corners, but other builders replied on a previous thread that this will not pose a problem. When I get to it mine will be a cutaway. Fred |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|