Wish we had a similar supplier here in the US. McF's is right back to their long wait times for product again. You'd think that their near demise would have taught them to be more prompt.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| New Lawrence McFadden source in Canada http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24245 |
Page 1 of 1 |
| Author: | Sheldon Dingwall [ Mon Oct 19, 2009 10:07 am ] |
| Post subject: | New Lawrence McFadden source in Canada |
Jeff at Woodessence has taken on importing and warehousing LM poly now. I bought two gallons this month and my cost is less than what I was paying direct without the wait and importing hassles. I'm one happy dude. www.woodessence.com He also stocks Target and Fuhr waterbased coatings too. Great guy to deal with. |
|
| Author: | DannyV [ Mon Oct 19, 2009 10:24 am ] |
| Post subject: | Re: New Lawrence McFadden source in Canada |
Is that polyurethane or polyester? I guess he can get either. Which are you using Sheldon? He is a good guy to deal with. Cheers, Danny |
|
| Author: | Sheldon Dingwall [ Mon Oct 19, 2009 11:12 am ] |
| Post subject: | Re: New Lawrence McFadden source in Canada |
Just the polyester currently. I use R-1775. I've used many different brands of polyester and so far this is the best by a long shot. One of the coolest features is that it can be spot touched up without a witness line. At least if you catch it within a week or so. Just sand the touch up area with 800 grit. Cut the catalized poly 50:50 with acetone and airbrush on 4-5 coats. We're getting perfect blends. The only thing that gives it away is when the instrument gets dusty, the dust will show the touched up spot somehow, but as long as it's clean, you can't see it. |
|
| Author: | Bob Garrish [ Mon Oct 19, 2009 11:33 am ] |
| Post subject: | Re: New Lawrence McFadden source in Canada |
I get all my abrasives (and got my sander) from Wood Essence. Jeff's great to deal with. |
|
| Author: | joe white [ Mon Oct 19, 2009 1:08 pm ] |
| Post subject: | Re: New Lawrence McFadden source in Canada |
Wish we had a similar supplier here in the US. McF's is right back to their long wait times for product again. You'd think that their near demise would have taught them to be more prompt.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|