| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Binding a Bridge http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24207 |
Page 1 of 1 |
| Author: | Chris aka Sniggly [ Fri Oct 16, 2009 6:34 am ] |
| Post subject: | Binding a Bridge |
....anyone done this? I'm interested in tackling something like this. I'm speaking in terms of WOOD BINDING. |
|
| Author: | TonyKarol [ Fri Oct 16, 2009 7:53 am ] |
| Post subject: | Re: Binding a Bridge |
yep ... purfling line too .... student did it .. same as a guitar body, but you dont need a channel, just glue to the bridge outline (minus the width of the binding and such unless you want the bridge bigger than std) |
|
| Author: | douglas ingram [ Fri Oct 16, 2009 8:00 am ] |
| Post subject: | Re: Binding a Bridge |
You can also glue a thin layer to the bottom. As you shape the side taper it shows as a nice outline. I've done that before, I'd do it again when the design calls for it. In that case it was a maple bridge with an ebony base layer. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|