| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Have you any pictures of a Fox Side Bender http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24181 |
Page 1 of 1 |
| Author: | segovia [ Wed Oct 14, 2009 2:13 pm ] |
| Post subject: | Have you any pictures of a Fox Side Bender |
Hi I purchased the plans for the Fox Side Bender from LMI, I am going to adapt it an remove the lamp cavity as I intend to use a heating blanket. Has anyone done this? I would alsolike some pictures of the FSB if there any out there, it would be a handy visual reference for me. Thanks John |
|
| Author: | segovia [ Wed Oct 14, 2009 2:30 pm ] |
| Post subject: | Re: Have you any pictures of a Fox Side Bender |
Hi Todd Thanks, I have come across your video's before - very informative. What I can't figure out is the purpose of the Aluminum Cross Bar, does this form some kind of clamp to hold everything together ? John |
|
| Author: | bluescreek [ Wed Oct 14, 2009 3:25 pm ] |
| Post subject: | Re: Have you any pictures of a Fox Side Bender |
The bar is more of a locator than support. If you try doing a cutaway , without the bar the pattern would move out of position in relation to the waist cawl |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|