| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24156 |
Page 1 of 1 |
| Author: | Steve Brown [ Mon Oct 12, 2009 7:44 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Good job! Thanks Todd. |
|
| Author: | Bill Hodge [ Mon Oct 12, 2009 7:53 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
As always, great work and much appreciated Todd, thanks!!! |
|
| Author: | jackwilliams [ Mon Oct 12, 2009 8:20 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
great job Todd! Jack |
|
| Author: | Richard G [ Mon Oct 12, 2009 10:13 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Excellent tutorial Todd! Thank you. I am looking forward to Part 3! Richard |
|
| Author: | SteveSmith [ Tue Oct 13, 2009 7:19 am ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Yes, thanks Todd! |
|
| Author: | Fred Tellier [ Tue Oct 13, 2009 7:58 am ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Thanks Tod, great videos, I need to get myself a squeegee it seems to work better than a credit card at leveling the epoxy. what do you spread the epoxy on the neck with. Fred |
|
| Author: | MaxBishop [ Tue Oct 13, 2009 8:36 am ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Todd, Thanks so much for doing the video. This will help greatly on my current build. I'm looking forward to part III. Max |
|
| Author: | Corky Long [ Tue Oct 13, 2009 1:06 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Todd - Thanks!! Great toot - This makes it very clear. |
|
| Author: | Bill Greene [ Tue Oct 13, 2009 1:08 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Outstanding...thank you greatly. Very helpful. |
|
| Author: | Dave Stewart [ Tue Oct 13, 2009 1:41 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Good stuff Todd. Very measured & deliberate technique (I remember being much more frazzled doing mine, all archtops, but I must admit the flat back seems to go a lot easier.) It also seemed to set up a lot quicker than the 15 min working time you are getting.....may things were too warm! Looking forward to the neck, which I found hardest. (BTW #1 was a 3 hr. download on dial up, but worth it) |
|
| Author: | Peter J [ Tue Oct 13, 2009 2:04 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Sincere thanks for taking the time to do this Todd. Up until this time I have been struggling with a single edge razor blade and much subsequent sanding. Your technique is a vast improvement from what I have been doing and I'm really looking forward to trying it on my next build. ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | DannyV [ Tue Oct 13, 2009 3:36 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Thanks for that Todd! Nothing prettier than nice wood coming to life under finish...... well maybe not nothing prettier, but it's nice. Looking forward to the next ones. Cheers, Danny |
|
| Author: | Hupaand [ Tue Oct 13, 2009 6:37 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
I'm glad to see someone say 'do it 3 times', not 'you may need 3 times'. I had always suspected as much. |
|
| Author: | Parser [ Tue Oct 13, 2009 9:05 pm ] |
| Post subject: | Re: Epoxy Pore Filling Video Parts 1 & 2 Posted in Tutorials |
Nice work Todd, thanks for posting. Are you near Green Ridge State Forest? I do some grouse hunting out there occassionally, it's a great part of the state! Trev |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|