Brad, I make the rails 1/4" and the slots 17/32".
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Stew-Mac 12 string tuner question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=24083 |
Page 1 of 1 |
| Author: | Brad Goodman [ Wed Oct 07, 2009 8:26 am ] |
| Post subject: | Stew-Mac 12 string tuner question |
I am using the "retro" 12 string tuners from Stew Mac. I want to make the "rails" 5/16" and the slots 9/16". Since the length of the posts are 1" that leaves just barely 1/8" of the end bearing in the hole in the middle of the peghead. Is this enough? Or.. should I reduce the rails to 1/4" in order to leave 3/16" "bearing". Thanks, Brad |
|
| Author: | Haans [ Thu Oct 08, 2009 6:28 am ] |
| Post subject: | Re: Stew-Mac 12 string tuner question |
Brad, I make the rails 1/4" and the slots 17/32".
|
|
| Author: | Brad Goodman [ Thu Oct 08, 2009 7:43 am ] |
| Post subject: | Re: Stew-Mac 12 string tuner question |
Haans, Thank you. You have been very helpful. Brad |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|