Like this
You can get them at routerbits.com
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Drill bit flush trim w bearing? For fancy headstock http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23914 |
Page 1 of 1 |
| Author: | Frei [ Thu Sep 24, 2009 7:58 pm ] |
| Post subject: | Drill bit flush trim w bearing? For fancy headstock |
I saw a "drill bit" like flush trim cutter, spiraled with a bearing on it, but can't find the post. Anyone know where to get them? Its for cutting a fancy Baroque style guitar headstock. Thanks |
|
| Author: | Rod True [ Thu Sep 24, 2009 9:33 pm ] |
| Post subject: | Re: Drill bit flush trim w bearing? For fancy headstock |
Like this You can get them at routerbits.com |
|
| Author: | Frei [ Fri Sep 25, 2009 12:30 am ] |
| Post subject: | Re: Drill bit flush trim w bearing? For fancy headstock |
BeautyThanks |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|