| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Taylor GS (16 series) Tracings http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23828 |
Page 1 of 1 |
| Author: | RaymundH [ Wed Sep 16, 2009 2:33 pm ] |
| Post subject: | Taylor GS (16 series) Tracings |
Hello, Has anyone done a Taylor style GS series? I'm looking for a tracing of one for a potential build. Thanks, Ray |
|
| Author: | TonyKarol [ Wed Sep 16, 2009 3:45 pm ] |
| Post subject: | Re: Taylor GS (16 series) Tracings |
No, sorry Ray .. I dont build taylor's ... when I wanted a Martin OM pattern, I simply went to the local shop with a notebook .. played the guitar, put it on my lap on top of the book and took the tracings of the lower, waist, and upper bout ... then went home and put them together |
|
| Author: | vachterman [ Wed Sep 16, 2009 3:58 pm ] |
| Post subject: | Re: Taylor GS (16 series) Tracings |
Hey Ray, a while ago i traced several Taylor body shapes and created CAD files to match. i'm pretty sure the GS was one of the shapes i worked on. i'm all the way on the other side of the world, and it's midnight already, so i'll check my archives first thing in the morning and get back to you. Udi. |
|
| Author: | matti [ Fri Sep 18, 2009 7:42 am ] |
| Post subject: | Re: Taylor GS (16 series) Tracings |
I know John Hall at Blues Creek guitars has the mold and bending forms for the Taylor GS so he might have a tracing Udi, If you do in fact have a CAD file of the GS I would be interested as well, Matt |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|