| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Oversizng Nut Files Slots http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23674 |
Page 1 of 1 |
| Author: | John Hale [ Thu Sep 03, 2009 8:36 am ] |
| Post subject: | Oversizng Nut Files Slots |
Guys I just bought a set of nut files from warmoth and they're gauged 10, 13, 17, 24, 32, 36, 40, 50. I play d'addario EJ18's gauged 14, 18, 27, 39, 49, 59, and I know from reading Todds posts here that a string can sit in a slot up to 4 thou bigger that the gauge, but my question it by rolling the files can I create large enough slots with the files I own or should I by a few individuals to supplement my set? |
|
| Author: | crich [ Thu Sep 03, 2009 9:34 am ] |
| Post subject: | Re: Oversizng Nut Files Slots |
I've rolled my file side to side and gotten good results. I have a nice rat tail file that I use with equally good results. Hope that helps! Clinton |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|