| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| cleaning weld-on from soundboard http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23546 |
Page 1 of 1 |
| Author: | ayavner [ Sun Aug 23, 2009 1:49 pm ] |
| Post subject: | cleaning weld-on from soundboard |
Well, poop... got a small blob of weld-on on my soundboard, despite my best efforts, and of course it dried up like The Booger Of The Gods before I noticed it.... Any tips on how to remove this without gouging up the board? Yes, I know, "don't do that in the first place"  was thinking maybe soften it up with acetone then get it off, and the remaining smear could come off with sanding block or scraper? Any help would be super-appreciated! adam |
|
| Author: | MRS [ Sun Aug 23, 2009 8:47 pm ] |
| Post subject: | Re: cleaning weld-on from soundboard |
I think the acetone should work. I would use that with a razor blade to gently scrape it off. |
|
| Author: | Dave Stewart [ Mon Aug 24, 2009 7:30 am ] |
| Post subject: | Re: cleaning weld-on from soundboard |
Adam, it sands off fine!. This is very normal with weld-on .... don't over think it. (ABS bound f-holes look like a dogs breakfast before you scrape/sand flush). Don't sweat it (and DON'T use solvent) |
|
| Author: | ayavner [ Mon Aug 24, 2009 8:06 am ] |
| Post subject: | Re: cleaning weld-on from soundboard |
Oh, great! Yeh i have been accused of overthinking everything! ![[uncle]](./images/smilies/surrenderflagqv6.gif "Uncle") I guess I am just so paranoid about gouging it or dishing it out where i scrape, but as you say its normal, I'll go for it! Hehe dog's breakfast..thanks! adam |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|