| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Need advise on a good bandsaw blade http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23479 |
Page 1 of 1 |
| Author: | ChuckH [ Mon Aug 17, 2009 3:59 pm ] |
| Post subject: | Need advise on a good bandsaw blade |
I just bought a 24" Grizzly bandsaw and was wondering if anyone could give me advise on a good blade for resawing back and side sets. I was looking at the Lenox Woodmaster CT blade, any opinions on this blade? The saw is capable of receiving up to a 1 1/2" blade. Thanks, Hutch |
|
| Author: | WaddyThomson [ Mon Aug 17, 2009 4:17 pm ] |
| Post subject: | Re: Need advise on a good bandsaw blade |
If I'm not mistaken, that's what Bob C and some others use, but wait for someone who knows to weigh in. |
|
| Author: | ChuckH [ Mon Aug 17, 2009 9:21 pm ] |
| Post subject: | Re: Need advise on a good bandsaw blade |
Thanks Waddy, maybe he'll chime in here. Is a wider blade like a 1 1/2" better than a 1" blade. I'd think so, less drift you'd think. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|