| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| duplicator patterns for mandolin http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=23000 |
Page 1 of 1 |
| Author: | John Kinnaird jr [ Tue Jul 07, 2009 9:22 pm ] |
| Post subject: | duplicator patterns for mandolin |
Is there a place where I can buy an arching guide for my duplicator to follow that would produce an F5 mandolin top and back? TIA John |
|
| Author: | John Copley [ Wed Jul 08, 2009 4:23 am ] |
| Post subject: | Re: duplicator patterns for mandolin |
Hi John, Would buying a top and back from Roger Siminof or Stew-Mac do the trick? They are both slightly different in profile. Roger has them in cheaper wood and a range of jigs and templates to suit. Cheers Chopper |
|
| Author: | John Kinnaird jr [ Wed Jul 08, 2009 6:44 pm ] |
| Post subject: | Re: duplicator patterns for mandolin |
Thanks John I do have Roger's construction book. I was hopping to avoid the expense of plates made of decent wood. I will try Roger. John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|