| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Source for Sitka Spruce veneer in Canada http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22717 |
Page 1 of 1 |
| Author: | collinsguitar [ Sat Jun 13, 2009 8:12 am ] |
| Post subject: | Source for Sitka Spruce veneer in Canada |
I am looking for a source of Sitka Spruce Veneer in Canada. I am hoping to find something in the range of .050-.100" for cross banding. Any help would be greatly appreciated. Thanks! MC |
|
| Author: | Shane Neifer [ Sat Jun 13, 2009 8:16 pm ] |
| Post subject: | Re: Source for Sitka Spruce veneer in Canada |
Mike, I know that they make spruce plywood so those mills slice spruce on a lathe but I haven't seen spruce veneer. Send me an e-mail and I will see if I can get something together for you. .050 to .100 is not too thin for the thickness sander. Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|