| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Behlen aerosol lacquer http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22675 |
Page 1 of 1 |
| Author: | roby [ Tue Jun 09, 2009 4:48 am ] |
| Post subject: | Behlen aerosol lacquer |
Hello all,has anyone tried this stuff,if so what were the results?Thanks Rob |
|
| Author: | bluescreek [ Tue Jun 09, 2009 6:06 am ] |
| Post subject: | Re: Behlen aerosol lacquer |
this works very well. It isn't instrument grade but it is better than DEFT. |
|
| Author: | Mike_P [ Tue Jun 09, 2009 3:45 pm ] |
| Post subject: | Re: Behlen aerosol lacquer |
actually Behlen does make aerosol versions of their instrument lacquer and sealer...they even have a cute little kit with toners and an included DVD (rather pricey IMHO, especially if you have no use for the toners) certainly a decent way for a 'budget' (i.e. no investment into a spray system) finish... I for one have always massively sucked when it comes to using rattle cans, but with plenty of leveling, etc, I'm sure a fine finish can be achieved... |
|
| Author: | bluescreek [ Tue Jun 09, 2009 3:53 pm ] |
| Post subject: | Re: Behlen aerosol lacquer |
I used behlen cans before getting a sprayer. I wasn't aware they had instrument grade cans. I used the top coat lacquer and had great results with that. I know the Behlen I use in the sprayer is as good as macfaddens. I do use both as I can get it at 2 different suppliers in my area and that saves shipping on the Hazmat fees. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|