Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Healdsburg Progress
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22649		 Page 1 of 1
Author:  Jimmy Caldwell [ Sat Jun 06, 2009 5:49 pm ]
Post subject:  Healdsburg Progress
Among lots of other projects, I've been working on my Healdsburg offerings for the big show in August. I'm using Amazon RW for the first time and if this stuff sounds as good as it taps, it may be my go to BRW substitute. It's a little heavier than BRW, but it works very similar and looks spectacular under finish. (I've already lacquered it , but no pics yet.) Here's a few pics of two of the three I'm planning to bring.

BRW/Adi 00-13 fret with Snakewood appointments and abalone rosette and top border
Amazon RW/Lutz OM with curly koa binding

I'm also planning on bringing my OM 30's prototype. I built this one with early 30's specs (ebony reinforced neck, bar frets, banjo tuners, etc.) A fun build and I plan to do lots more of the vintage stuff.

Attachment:
OM1body.jpg

Attachment:
OMbody2.jpg

Attachment:
OMpeghead.jpg

Attachment:
P1010329.JPG

Attachment:
P1010330.JPG

Attachment:
P1010333.JPG
Author:  Steve Kinnaird [ Sat Jun 06, 2009 10:13 pm ]
Post subject:  Re: Healdsburg Progress
Thanks for the progress report Jimmy. Looks like we're at about the same place of incompletion.
I am really looking forward to meeting you, and being inspired by your work.

Steve
Author:  Ken Franklin [ Sat Jun 06, 2009 11:53 pm ]
Post subject:  Re: Healdsburg Progress
They look great Jimmy. See you at Healdsburg. What scale are you using on that 13 Fret?
Author:  Jimmy Caldwell [ Mon Jun 08, 2009 12:20 pm ]
Post subject:  Re: Healdsburg Progress
Ken Franklin wrote:
They look great Jimmy. See you at Healdsburg. What scale are you using on that 13 Fret?


Ken,

It's 24.9. Works really well on this size guitar. This is the 5th one I've done and they've all been really good.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/