Official Luthiers Forum! http://www.luthiersforum.com/forum/
stearated Klingspor http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22640	Page 1 of 1

---

Author:	jsmith [ Fri Jun 05, 2009 7:39 pm ]
Post subject:	stearated Klingspor
Does anyone have any feedback regarding either the stearated aluminum oxide paper or the stearated lightweight silicon carbide paper that Klingspor sells? Thanks in advance--Jay

---

Author:	WaddyThomson [ Fri Jun 05, 2009 8:42 pm ]
Post subject:	Re: stearated Klingspor
From everything I've heard, the Klingspoor papers are fine.

---

Author:	jsmith [ Fri Jun 05, 2009 9:24 pm ]
Post subject:	Re: stearated Klingspor
I should have been clearer with my question. What I'm wondering is whether anyone out there has used either of those Klinspor products to sand between series of lacquer coats, and/or if one seems to work better than the other. Thanks.

---

Author:	TonyFrancis [ Fri Jun 05, 2009 9:54 pm ]
Post subject:	Re: stearated Klingspor
-

---

Author:	Chris Paulick [ Sat Jun 06, 2009 7:17 am ]
Post subject:	Re: stearated Klingspor
I use it and buy the psa disc. It works just fine and comes in grits to at least 1000.

---

Author:	KHageman [ Sat Jun 06, 2009 9:43 am ]
Post subject:	Re: stearated Klingspor
The Klingspor products are very good. I use the economy lightweight silicon carbide paper with my 5 inch orbital sander and it works great. The price is right too. A 50 pack H & L for $5.00. Grits from 80 to 400. I think you will like the their paper. Ken

---

Author:	Mike Collins [ Sat Jun 06, 2009 12:46 pm ]
Post subject:	Re: stearated Klingspor
Klingspor products are really great ! And they offer many different price ranges in sandpaper. Sterated paper ;a Zinc Sterate coating is applied to help keep the paper free of clogs. This is fine for most woods & finishes but NOT waterbase ones. Mike

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/