| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| EMTECH™ EM6000 Lacquer UK Supplier http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22605 |
Page 1 of 1 |
| Author: | John Hale [ Tue Jun 02, 2009 7:38 pm ] |
| Post subject: | EMTECH™ EM6000 Lacquer UK Supplier |
I've read so many good reports here about EM6000 lacquer, but when I try and find a UK supplier I seem to hit a brick wall anyone here able to help? Thanks |
|
| Author: | hastingsrick [ Fri Jun 05, 2009 6:21 am ] |
| Post subject: | Re: EMTECH™ EM6000 Lacquer UK Supplier |
Hello John I too have trawled the internet looking for a supplier in the UK but have found nothing. After reading postings on the forum at the Target Coatings site it seams that Colortone waterbased lacquer as supplied by Stewmac is the same . I did find a site in Canada that would send EM6000 to Uk but the shipping charges were high to say the least. After usiing Nitro for the last 25 years I am thinking of giving waterbased a try. Good luck |
|
| Author: | joekelly9692 [ Fri Jun 05, 2009 10:19 am ] |
| Post subject: | Re: EMTECH™ EM6000 Lacquer UK Supplier |
hi guys........i just got dhl delivery this morning of 2 gallons of colortone waterbase laq from stewmac and the shipping was 35 quid to scotland..........i grian fill my guitars with z poxy and can get about six guitars finished with a quart of this stuff....i feel that z poxy and wb laq gives a real glowing popped look that makes nitro of no use to me....imho...so that was wb laq top coat 1 gllaon and wb sanding sealer 1 gallon.....and shipping all in 100 quid and this will last two years or 20 guitars.......if you grain fill that is........joe |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|