| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bending Cuban Mahogany - Any Tips? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22472 |
Page 1 of 1 |
| Author: | Darrel Friesen [ Sat May 23, 2009 3:28 pm ] |
| Post subject: | Bending Cuban Mahogany - Any Tips? |
Just seeing if anyone can give me any tips on thickness, heat, moisture etc. for bending. I've always bent on a pipe, but have never bent mahogany period. I was told on another forum to build a bender if I wanted to be sure and while I intend to do so one day, the pipe has always worked well for me with the figured maple I use for archtops. Thanks |
|
| Author: | bluescreek [ Sat May 23, 2009 3:49 pm ] |
| Post subject: | Re: Bending Cuban Mahogany - Any Tips? |
If you can bend figured maple , this is going to be no brainer. |
|
| Author: | Darrel Friesen [ Sun May 24, 2009 11:38 am ] |
| Post subject: | Re: Bending Cuban Mahogany - Any Tips? |
Thanks John. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|