| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| how does zpoxy react with paint stripper http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22429 |
Page 1 of 1 |
| Author: | joekelly9692 [ Tue May 19, 2009 11:06 pm ] |
| Post subject: | how does zpoxy react with paint stripper |
hi all.......do any of you guys know how zpoxy finishing resin reacts with paint stripper.....like for removing the finish for the bridge and fb extension.......i have no stripper at the moment to test this out my self....... |
|
| Author: | Barry Daniels [ Wed May 20, 2009 8:16 am ] |
| Post subject: | Re: how does zpoxy react with paint stripper |
I would think the zpoxy would be rather unaffected by stripper. But I have been wrong before. |
|
| Author: | Martin Turner [ Fri May 22, 2009 6:55 am ] |
| Post subject: | Re: how does zpoxy react with paint stripper |
Ditch the stripper........remove finish/Z poxy using mechanical means. I use a scalpel or chisel to remove finish prior to gluing bridge or fingerboard extension. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|