| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Source for threaded inserts http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22289 |
Page 1 of 1 |
| Author: | Mark A Thorpe [ Thu May 07, 2009 6:00 am ] |
| Post subject: | Source for threaded inserts |
I've made some wood knobs from leopardwood and I need the little inserts for the set screw, all I can find are the ones that you drill a 1/4" hole and screw the insert in, which usually destroys the knob. Anyone know of a source? Thanks. |
|
| Author: | woody b [ Thu May 07, 2009 6:27 am ] |
| Post subject: | Re: Source for threaded inserts |
These inserts from Mcmaster Carr use a 1/8" hole. http://www.mcmaster.com/#99362a100/=1rofpv |
|
| Author: | Mark A Thorpe [ Thu May 07, 2009 6:58 am ] |
| Post subject: | Re: Source for threaded inserts |
Thanks Woody that's what I was looking for. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|