Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Personal Shop Safety R&D Results...A Must Read
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22234		 Page 1 of 1
Author:  Chris aka Sniggly [ Sun May 03, 2009 11:21 am ]
Post subject:  Personal Shop Safety R&D Results...A Must Read
READ THIS FIRST...

I thought it might be prudent to post my findings regarding a recent personal shop safety venture. The 3M dust masks I usually use have the rubber bands that break all the time...so I thought I would explore alternatives. It is my assertion that EVERYONE can benefit greatly from my testing. Thus I reveal it here. Further I suggest EVERYONE implement this new and improved way of keeping dust out of your lungs...so that YOU can stay in the shop!...


But first....I want you to see the device in it's original form. It worked FANTASTIC...but had it's drawbacks...

.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Image


..SO I improved the design....but still was not satisfied....it must be PERFECT! The method was crude but it worked...a little....
Image


..After much hard work and untold money and time (you know how expensive R&D can be)....the final result....
Image

Copyrights...Trademarks...Patents...and all general claims of interest are heretofor available for 1 million dollars per device!!!

laughing6-hehe laughing6-hehe laughing6-hehe I couldn't help it folks....I just couldn't....
Author:  Gregg C [ Sun May 03, 2009 11:27 am ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
$1,000,000 Sold !! The Check Is In The Mail !!!
Author:  Gregg C [ Sun May 03, 2009 11:27 am ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
$1,000,000 Sold !! The Check Is In The Mail !!!
Author:  Rod True [ Sun May 03, 2009 3:03 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
Chris, it really is easier to just CA it to your face. It won't come off that way...............EVER! laughing6-hehe
Author:  Chris aka Sniggly [ Sun May 03, 2009 4:20 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
Actually Rod we tested all the glue's.....

CA and Epoxy didn't allow for the proper facial expressions when throwing fits....
Hide Glue and Fish Glue released when the face got red from anger...
...and Titebond allowed the face mask to 'creep'......

laughing6-hehe laughing6-hehe laughing6-hehe laughing6-hehe laughing6-hehe
Author:  Bill Hodge [ Sun May 03, 2009 5:20 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
Of course wrapping your head in Saran Wrap would guarantee no dust in the sinuses or lungs and becausae it's clear it can double as safety glasses. :D It would have a pretty severe side affect though. [xx(] :shock:
Author:  MRS [ Sun May 03, 2009 5:33 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
I tried wearing a scuba tank and mask but my back was killing me after about ten minutes.
Author:  Jim Watts [ Sun May 03, 2009 10:27 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
If I use it, can I just credit it to you? :P
Author:  ChuckH [ Sun May 03, 2009 10:56 pm ]
Post subject:  Re: Personal Shop Safety R&D Results...A Must Read
MRS wrote:
I tried wearing a scuba tank and mask but my back was killing me after about ten minutes.


Try working underwater, like in your local swimming pool. If you use enriched oxygen (Nitrox) you have a longer bottom time to work on you build.....lol
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/