| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Dry sanding tip http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22228 |
Page 1 of 1 |
| Author: | J Hewitt [ Sat May 02, 2009 9:24 pm ] |
| Post subject: | Dry sanding tip |
I run across these sanding disc at a local auto parts store. They are called " 3M Trizact disc". They only come in three different grits. 800-1000-3000. I've only used the 1000 grit with the hook and loop holder on the drill. The cool thing about these disc is that the disc do not gum up or load up while dry sanding. After 10 or 15 seconds of sanding I just used compressed air to blow the dust off of the disc. It was clean and just like new again. They also seem to be durable and not just a one time use only. Just had to share....I thought it was amazing there was no load up!! |
|
| Author: | woody b [ Sun May 03, 2009 6:13 am ] |
| Post subject: | Re: Dry sanding tip |
Be careful. If you're using an air powered die grinder those little disks can remove alot of material real quick. |
|
| Author: | J Hewitt [ Sun May 03, 2009 6:46 am ] |
| Post subject: | Re: Dry sanding tip |
Its an electric close quarter drill.......running at low rpm |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|