Official Luthiers Forum!
http://www.luthiersforum.com/forum/

NEWS!! Marking Templates for OLF Plans
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22114		 Page 1 of 1
Author:  Michael Dale Payne [ Fri Apr 24, 2009 1:28 pm ]
Post subject:  NEWS!! Marking Templates for OLF Plans
Every since Stewmac started caring the OLF plans I have received PM after PM requesting a brace location and shape profile template.

Well at this time I can't say a lot other than to tell you that they are in the works and should be available in the fairly near future. [:Y:] That is all for now more when everything is ready to go!!!!!!!!!
Author:  Michael Dale Payne [ Fri Apr 24, 2009 2:52 pm ]
Post subject:  Re: NEWS!! Marking Templates for OLF Plans
here is the teaser

Attachment:
teaser.jpg
Author:  Ken C [ Fri Apr 24, 2009 11:02 pm ]
Post subject:  Re: NEWS!! Marking Templates for OLF Plans
Good idea, Mike. I could have used one a couple of months ago! I ended up making my own out of masonite for the OLF SJ. Transferring the layout to the top or back was as easy as extending the brace lines on your drawing out past the perimeter of the body outline. Then after I had cut the top and back a little oversize, I could lay it on your drawings and with a long straight edge transfer the lines to the top and back. Not as easy as having your tracing template, but it worked well.

Will you sell the templates through StewMac?

Ken
Author:  Michael Dale Payne [ Sat Apr 25, 2009 10:24 am ]
Post subject:  Re: NEWS!! Marking Templates for OLF Plans
like I said no morre to tell right now
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/