Official Luthiers Forum!
http://www.luthiersforum.com/forum/

New Luthier Tips du Jour video - Neck Blanks
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=22037		 Page 1 of 1
Author:  Robbie O'Brien [ Mon Apr 20, 2009 8:46 am ]
Post subject:  New Luthier Tips du Jour video - Neck Blanks
The newest Luthier Tips du Jour instructional video is on Youtube. The topic is neck Blanks. Subtitles are available in both English and Portuguese and you can translate them into any other language by using the CC option on Youtube.
As always, comments and discussion are welcome.
Enjoy!
Author:  Bill Hodge [ Mon Apr 20, 2009 8:55 am ]
Post subject:  Re: New Luthier Tips du Jour video - Neck Blanks
Another fine video Robbie, thanks! :)
Author:  ChuckH [ Mon Apr 20, 2009 11:35 am ]
Post subject:  Re: New Luthier Tips du Jour video - Neck Blanks
Thanks Robbie,
I love these videos. Always looking forward to the next one.

Hutch
Author:  Ken McKay [ Tue Apr 21, 2009 2:38 pm ]
Post subject:  Re: New Luthier Tips du Jour video - Neck Blanks
Thanks Robbie, I love looking into others shops.
Author:  Ricardo [ Tue Apr 21, 2009 4:38 pm ]
Post subject:  Re: New Luthier Tips du Jour video - Neck Blanks
Robbie, curious to know why you don't cut the excess thickness of peg head from the backside? BTW, thanks for the tip on installing classical tuners among many of your others.
Author:  Robbie O'Brien [ Tue Apr 21, 2009 4:49 pm ]
Post subject:  Re: New Luthier Tips du Jour video - Neck Blanks
Ricardo wrote:
Robbie, curious to know why you don't cut the excess thickness of peg head from the backside? BTW, thanks for the tip on installing classical tuners among many of your others.



For me it is easier to clean up the cut if it is on the face of the peghead instead of on the back. I can easily hand plane it or run it across a joiner. You can't do that on the back side of the peghead.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/