| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Sealing sound board before Nitro? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21987 |
Page 1 of 1 |
| Author: | RaymundH [ Fri Apr 17, 2009 9:41 pm ] |
| Post subject: | Sealing sound board before Nitro? |
Before the first coat of nitro (or preferred final finish) hits your new top, what product do you like to seal it with? (if any) Ray |
|
| Author: | Mark Groza [ Fri Apr 17, 2009 10:00 pm ] |
| Post subject: | Re: Sealing sound board before Nitro? |
i use shellac. |
|
| Author: | DannyV [ Fri Apr 17, 2009 11:41 pm ] |
| Post subject: | Re: Sealing sound board before Nitro? |
Todd, What's the skinny on vinyl sealer. I've heard you mention it before and am curious as to the benefits and how you work with it. Thanks, Danny |
|
| Author: | bluescreek [ Sat Apr 18, 2009 6:14 am ] |
| Post subject: | Re: Sealing sound board before Nitro? |
One thing I would add , I use the same brands sealer. I also use the vinyl sealer . I use the same finish schedule as Martin , seal - fill - seal 8 coats of lacquer , ( 1 coat per hour ) let set 3 weeks , level sand , 3 finish coats wet sand buff and polish. The key isn't what you put on but what you let on. When I am finished I want .006 to .008 john hall |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|