| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Dimensions of peg head slots? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21968 |
Page 1 of 1 |
| Author: | Ricardo [ Thu Apr 16, 2009 5:22 pm ] |
| Post subject: | Dimensions of peg head slots? |
Cumpiano says slots are 5/8" wide, Bogdanovich says 1/2" What say you? And how long are your slots? Thank |
|
| Author: | Peter J [ Thu Apr 16, 2009 6:59 pm ] |
| Post subject: | Re: Dimensions of peg head slots? |
Rich, 5/8" x 4 1/8" (before string ramp) works fine for me. |
|
| Author: | Mike Collins [ Sat Apr 18, 2009 7:13 am ] |
| Post subject: | Re: Dimensions of peg head slots? |
5/8" x 100mm before ramping. I've measured 100's of classicals and this is pretty much the standard. I've seen 3/4" wide ones. Mike |
|
| Author: | Alain Moisan [ Sat Apr 18, 2009 10:31 am ] |
| Post subject: | Re: Dimensions of peg head slots? |
Mines are 5/8'' by 95mm. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|