Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Loking for SJ plans.
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21955		 Page 1 of 1
Author:  8string [ Wed Apr 15, 2009 2:56 pm ]
Post subject:  Loking for SJ plans.
I am trying to find plans and any molds and jigs for an SJ or small jumbo guitar. I have alreadychecked the listed sponsors and went back in the archives. Can anyone direct me to a supplier? Thanx, Vic (8string)
Author:  Mike Mahar [ Wed Apr 15, 2009 3:36 pm ]
Post subject:  Re: Loking for SJ plans.
The Small Jumbo is one of the OLF's most popular plans. They used to be sold directly but Stewart McDonald now sells them and the OLF gets a royalty.

John Hall of Blues Creek has molds and bending forms for this model as well.
Author:  L. Presnall [ Wed Apr 15, 2009 3:36 pm ]
Post subject:  Re: Loking for SJ plans.
Vic, the OLF SJ plans by Michael Payne are available thru Stew-Mac...here's the link right to the product...

http://www.stewmac.com/shop/Books,_plans/Plans/Small_Jumbo_Guitar_Plans.html

you won't regret getting this plan, it's AWESOME! As far as molds and jigs, John Hall from Blues Creek guitars will hook you up with excellent quality and prices! Here's the link to his site...

http://www.bluescreekguitars.com/catalog/

Hope this helps!

Larry
Author:  Michael Dale Payne [ Wed Apr 15, 2009 4:21 pm ]
Post subject:  Re: Loking for SJ plans.
Speaking of which :D we just recived a new order for the plans from Stewmac. Once again I have to thank you guys and gals for making these plans sets very scsessful for Stewmac, this forum and myself. For those new to the forum the large part of the profit on these plans goes directly to help support this forum. So buy 10 or 12 sets of each. you can never have too many [:Y:] laughing6-hehe [:Y:]

It appears we are selling about 150 set every 2 months or so. The word has gotten around about these plans and I owe the great word of mouth recommedations I hear about to you guys [clap] [clap] [clap] [clap] [clap] [clap] thanks tons [clap] [clap] [clap]
Author:  Jim Kirby [ Wed Apr 15, 2009 5:35 pm ]
Post subject:  Re: Loking for SJ plans.
I tell ya, Michael, they'd be drooling over the "French Polishing with Michael Payne" video at this point [:Y:] [:Y:] [:Y:]
Author:  LiquidGabe [ Wed Apr 15, 2009 6:02 pm ]
Post subject:  Re: Loking for SJ plans.
Jim Kirby wrote:
I tell ya, Michael, they'd be drooling over the "French Polishing with Michael Payne" video at this point [:Y:] [:Y:] [:Y:]

Release date?
Author:  Ken C [ Thu Apr 16, 2009 10:22 pm ]
Post subject:  Re: Loking for SJ plans.
8string wrote:
I am trying to find plans and any molds and jigs for an SJ or small jumbo guitar. I have alreadychecked the listed sponsors and went back in the archives. Can anyone direct me to a supplier? Thanx, Vic (8string)


Hi Vic,

I am currently building an OLF SJ. It is a really nice build. The body is essentially done except for final sanding. I have had a lot of nice comments on the shape of the body. I should have it ready to spray in a couple of weeks. Lots of great help here as well if you go with MP's plans.

Ken
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/