| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| First Build-Small Guitar Plan Recommendation http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21820 |
Page 1 of 1 |
| Author: | Steve Mock [ Mon Apr 06, 2009 8:27 pm ] |
| Post subject: | First Build-Small Guitar Plan Recommendation |
I have been reading and absorbing all the information you folks have posted over the years-Thanks-It has been a real education! I a planning my first guitar and am looking for any recommendation on plans for a smaller guitar for my daughter. I have searched for plans, looked at various suppliers and have seen the terms "parlor", 3/4 size, OO, OOO? I hoping someone can make a recommendation on a set of plans that they have previously built, and liked. Thanks for all the great advice you folks have posted Steve |
|
| Author: | Rod True [ Mon Apr 06, 2009 9:44 pm ] |
| Post subject: | Re: First Build-Small Guitar Plan Recommendation |
Hi Steve, welcome to the OLF, I'd recommend the L-OO plans from GAL (Guild of American Luthier's). They are a great set of plans with excellent detail. A nice small guitar too. |
|
| Author: | Blain [ Mon Apr 06, 2009 10:35 pm ] |
| Post subject: | Re: First Build-Small Guitar Plan Recommendation |
Hi Steve, I just wanted to say Welcome to the OLF! |
|
| Author: | WaddyThomson [ Tue Apr 07, 2009 9:10 am ] |
| Post subject: | Re: First Build-Small Guitar Plan Recommendation |
Welcome to OLF, Steve. Glad to have you aboard. Much help is available here for your asking. Good luck on your start. |
|
| Author: | John Hale [ Tue Apr 07, 2009 1:16 pm ] |
| Post subject: | Re: First Build-Small Guitar Plan Recommendation |
I'd recommend Jonathan Kinkades build your own acoustic guitar book it's got plans of his version of an om |
|
| Author: | Steve Mock [ Tue Apr 07, 2009 7:14 pm ] |
| Post subject: | Re: First Build-Small Guitar Plan Recommendation |
Thanks to all. Nice to know the help is there when you need it. This first build is really more of a practice build-I have a lot of wood so the cost should not be a big drain. Once I have the confidence, I'll move up to nicer wood from one of the suppliers here. Thanks again!! Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|