| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 12 string bridge plate thickness http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21811 |
Page 1 of 1 |
| Author: | Mark Groza [ Mon Apr 06, 2009 8:29 am ] |
| Post subject: | 12 string bridge plate thickness |
What thickness are your 12 string bridge plates? Are yours thicker or are they the same as your 6 string guitars? |
|
| Author: | Michael Dale Payne [ Mon Apr 06, 2009 9:33 am ] |
| Post subject: | Re: 12 string bridge plate thickness |
Mine are the same. skew cut suger malple .09" thick |
|
| Author: | JJ Donohue [ Mon Apr 06, 2009 10:13 am ] |
| Post subject: | Re: 12 string bridge plate thickness |
I use the same thickness, .090" but extend the width by .250" from normal. Disclosure: I've only built one 12 string and it's less than 60 days old. When folks submit recommendations, it would be helpful if we knew such information. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|