| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 12" disc sander http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21679 |
Page 1 of 1 |
| Author: | Laurent Brondel [ Sat Mar 28, 2009 7:02 am ] |
| Post subject: | 12" disc sander |
I'm looking for a 12" aluminum or steel platter wich that can mounted on a 5/8" motor arbor, I can't seem to find any source although I've seen them. Any idea? |
|
| Author: | Steve Marcq [ Sat Mar 28, 2009 9:11 am ] |
| Post subject: | Re: 12" disc sander |
Laurent, I believe I have one of those - 5/8" sounds like the diameter of my old (1950?) Shopsmith's arbor too. My dad used it as, well, a disc sander. I'll check when I'm in my shop in a bit. Maybe try the Shopsmith website? Steve |
|
| Author: | WaddyThomson [ Sat Mar 28, 2009 9:13 am ] |
| Post subject: | Re: 12" disc sander |
Craftsman used to have one for their large 12", Radial Arm Saw. Don't know if they are still available. |
|
| Author: | ballbanjos [ Sat Mar 28, 2009 10:28 am ] |
| Post subject: | Re: 12" disc sander |
Shopsmith sells a nice 12" steel disk. Here's a link: http://www.shopsmith.com/ownersite/catalog/sn_sandingdisc.htm Dave |
|
| Author: | Howard Klepper [ Sat Mar 28, 2009 11:44 am ] |
| Post subject: | Re: 12" disc sander |
Are you mounting to a table saw arbor, Laurent? I ask because the table is an essential part of a disc sander. |
|
| Author: | Brook Moore [ Sat Mar 28, 2009 12:37 pm ] |
| Post subject: | Re: 12" disc sander |
Grizzly sells one as a repair part for a sander: http://www.grizzly.com/products/g7297/parts |
|
| Author: | Laurent Brondel [ Sat Mar 28, 2009 12:56 pm ] |
| Post subject: | Re: 12" disc sander |
Thanks for the replies guys, a used Shopsmith disk should be easy to find. Howard, I have a couple of motors laying around and will make a slotted 90ยบ table with ply, which will serve my purpose entirely. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|