| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Porter Cable 310 mount in router table? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21386 |
Page 1 of 1 |
| Author: | delco [ Sun Mar 08, 2009 8:32 pm ] |
| Post subject: | Porter Cable 310 mount in router table? |
greetings all- came across a PC router/shaper table 698 for sale locally and was wondering if anyone had tried mounting the 310 laminate trimmer in one of these? I assume it'd fit but thought I'd ask just to see if anyone had experience with it. Thanks! |
|
| Author: | SteveSmith [ Tue Mar 10, 2009 3:40 pm ] |
| Post subject: | Re: Porter Cable 310 mount in router table? |
I don't know of anyone who has mounted a PC 310 or any other laminate trimmer in a router table. Doesn't mean it hasn't been done. In general, I think a full size router would work better for a table. |
|
| Author: | Frank Aarre [ Tue Mar 10, 2009 6:50 pm ] |
| Post subject: | Re: Porter Cable 310 mount in router table? |
i've mounted a bosch colt in a table, it works but it's no substitute for a router. i did the copy routing for my forms this way but i cut very close to the line with a jigsaw first to not stress it. don't know if your lam trimmer will fit this table though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|