My side bending toot has been reposted and is now once again available.
You can find it here: http://luthiersforum.com/forum/viewtopic.php?f=10117&t=21257&p=294648#p294648
Thanks!
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Side Bending Toot Is Back On-line http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21258 |
Page 1 of 1 |
| Author: | Hesh [ Sat Feb 28, 2009 10:21 am ] |
| Post subject: | Side Bending Toot Is Back On-line |
My side bending toot has been reposted and is now once again available. You can find it here: http://luthiersforum.com/forum/viewtopic.php?f=10117&t=21257&p=294648#p294648 Thanks!
|
|
| Author: | Randolph [ Sat Feb 28, 2009 2:08 pm ] |
| Post subject: | Re: Side Bending Toot Is Back On-line |
Hesh, Thank you. This couldn't have come at a better time!!! 
|
|
| Author: | Richard G [ Sat Feb 28, 2009 3:02 pm ] |
| Post subject: | Re: Side Bending Toot Is Back On-line |
Great tutorial, Hesh! Thank you for posting your method. Would you consider using Super Soft on Koa or would staining be an issue? |
|
| Author: | Hesh [ Sat Feb 28, 2009 3:12 pm ] |
| Post subject: | Re: Side Bending Toot Is Back On-line |
You are very welcome guys! Richard my friend yes I most certainly would consider SuperSoft and had I know about it I would have used it on the piece of Koa in the toot. I don't know about any staining potential for SS so perhaps someone who does will kindly weigh-in and let us all know. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|