| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| whats the best way to fix a finish sand through on the edge http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21247 |
Page 1 of 1 |
| Author: | joekelly9692 [ Fri Feb 27, 2009 4:41 pm ] |
| Post subject: | whats the best way to fix a finish sand through on the edge |
hi all......i started fine sanding my guitar that i sprayed with colortone sanding sealer and clear topcoat and i micromeshed back through to the sanding sealer right on the edge could you guys give me any suggestions on the best way to deal with this.....could i try airbrushing some lacquer on there? as always thanks for help guys......joe |
|
| Author: | Michael Dale Payne [ Fri Feb 27, 2009 4:47 pm ] |
| Post subject: | Re: whats the best way to fix a finish sand through on the edge |
I would air brush 3-4 coats over lap at least a half an inch allow to cure the relevel that area |
|
| Author: | joekelly9692 [ Fri Feb 27, 2009 4:54 pm ] |
| Post subject: | Re: whats the best way to fix a finish sand through on the edge |
thanks Michael .....i will give this a blast tommorow...... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|