What
nobody has even tried this stuff.Looks like it would be good for pore filler it nothing else.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Envirotex For Finish ? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21152 |
Page 1 of 1 |
| Author: | Mark Groza [ Sun Feb 22, 2009 8:14 am ] |
| Post subject: | Envirotex For Finish ? |
Has any one used Envirotex as a guitar finish? I did a search and not much on this about durability of it.A friend of mine has it on his bar top and likes it alot and wants it on a guitar i'm building for him.I know it sands well and can be brought to a glassy finish, but how is the durability?I think it is a epoxy of sort as it's 2-part.So that's why i asked. |
|
| Author: | Mark Groza [ Mon Feb 23, 2009 8:36 am ] |
| Post subject: | Re: Envirotex For Finish ? |
What nobody has even tried this stuff.Looks like it would be good for pore filler it nothing else.
|
|
| Author: | Bob Garrish [ Mon Feb 23, 2009 10:04 am ] |
| Post subject: | Re: Envirotex For Finish ? |
According to The Goog, it's a pourable epoxy (pourable epoxy, or polyester, is pretty much the bartop standard). It will be durable...but it's not at all suitable as a guitar finish. They already make good products for epoxy pore filling, and those will do a better job of that as well. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|