Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Source for Belleville Washers
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=21129		 Page 1 of 1
Author:  Chris aka Sniggly [ Thu Feb 19, 2009 7:49 pm ]
Post subject:  Source for Belleville Washers
Actually I am looking for the proper specs the washer should be in a butt joint neck to body application. Don't want to pay LMI 10 bucks plus shipping for this stuff.
Author:  JJ Donohue [ Thu Feb 19, 2009 8:07 pm ]
Post subject:  Re: Source for Belleville Washers
http://www.keybellevilles.com/stock.html

Item # K0637-A-032
Author:  Chris aka Sniggly [ Thu Feb 19, 2009 8:24 pm ]
Post subject:  Re: Source for Belleville Washers
Thanks JJ....I was digging around McMaster and found the following....

This application is for butt joint neck to body construction.

Part# 91255A545 Alloy Steel Button Head Socket Cap Screw 1/4"-20 Thread, 2" Length, Packs of 10

Part# 90192A121 HI-Strength Stl Knife-Thread Insert for Wood Hex Drive, 1/4"-20 Internal Thread, 19/32 Length

Part# 9712K63 High-Carbon Steel Belleville Disc Spring .255" ID, .500" OD, .025" Thick, Packs of 12

...I guess I could have pasted the links.... gaah
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/