| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| installing an lr baggs imix on a new build http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20921 |
Page 1 of 1 |
| Author: | joekelly9692 [ Sat Feb 07, 2009 1:04 pm ] |
| Post subject: | installing an lr baggs imix on a new build |
hi everyone.. im a complete newbie when it comes to installing pick ups in acoustic guitars.....and on reading the manual it seems very simple but i was wondering if anyone could offer any advice or hints and tips on how the installation procedure would be on a new build as i can see my self taking the strings on and of a zillion times due to my newbiness to pickups.....i have already drilled the half inch hole for the jack plug so any other advice would be well recieved..... thanks joe |
|
| Author: | Tim McKnight [ Sat Feb 07, 2009 9:16 pm ] |
| Post subject: | Re: installing an lr baggs imix on a new build |
Follow the instructions. It is pretty straight forward. Just don't install the i-beam too close to your string ball ends. Great PU system especially for mega high volume venues. The M1 is a great PU too. |
|
| Author: | joekelly9692 [ Sun Feb 08, 2009 2:12 pm ] |
| Post subject: | Re: installing an lr baggs imix on a new build |
cheers tim |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|