| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Z-poxy grain filler http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20895 |
Page 1 of 1 |
| Author: | Fred Tellier [ Fri Feb 06, 2009 3:42 pm ] |
| Post subject: | Z-poxy grain filler |
I will soon be at the finishing stage of my cocobolo 000 and have decided to give Z-poxy a try, and I want to stain my neck. Should one stain before or after filling with Z-pozy, my plan is to sand to the point that the epoxy is only in the grain. Also what brand or type of stain is best with Z-poxy. I also applied shelac to the top to prevent glue staining the spruce while gluing the bindings, I have never done this before, can I spray behlens vinyl sealer and lacquer over the shelac or should I sand the top back to bare wood. Fred |
|
| Author: | Jimmy Caldwell [ Fri Feb 06, 2009 4:11 pm ] |
| Post subject: | Re: Z-poxy grain filler |
Today must be finishing day. Hopefully in 3-4 weeks we'll get to see a bunch of finished guitar pics. About the stain; if you're going to sand the epoxy back to bare wood, I'd recommend staining both before and after the z-poxy. I use the trans-tint stains mixed in alcohol. Then apply your sealer and proceed as usual. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|