Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Help needed in Maine
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20632
Page 1 of 1

Author:  Wes McMillian [ Thu Jan 22, 2009 7:34 pm ]
Post subject:  Help needed in Maine

Hey guys, somebody posted on another forum requesting a set of sides bent for an OM. The guy lives in Kittery, Maine. Any takers?

http://www.flatpickerhangout.com/forum/ ... IC_ID=6981

Author:  Steve Marcq [ Thu Jan 22, 2009 8:50 pm ]
Post subject:  Re: Help needed in Maine

Hello Wes, I know someone in the Exeter NH (15-20 minutes away) area who likely would. If you PM me I'll give you his info.

Steve

Author:  Wes McMillian [ Sat Jan 24, 2009 11:02 am ]
Post subject:  Re: Help needed in Maine

Thanks, Steve. I don't know the guy, just trying to help out. I'm hesitant to go sharing contact information of people I don't know without their consent, though, I was just hoping someone could go over and offer to help the guy out. I guess if your friend explicitly gives the OK, I'll PM the guy over there and give him the information. He has stated he'd be willing to ship the sides, but I figured someone local would be better.

Thanks for the feedback and offer. If your friend says it's OK, I'll give the guy his info.

Funny, I thought there were other here from around Maine?

Author:  Laurent Brondel [ Sat Jan 24, 2009 11:32 am ]
Post subject:  Re: Help needed in Maine

I am in western Maine, but I do not have an OM form. My A-2 is close enough though. Contact info is on my website.

Author:  Steve Marcq [ Sat Jan 24, 2009 8:05 pm ]
Post subject:  Re: Help needed in Maine

Wes, I just left a message for him and will let you know what he says. The two are only about 15 minutes apart, so shipping wouldn't likely be an issue.

Steve

Author:  atracksler [ Mon Jan 26, 2009 1:05 pm ]
Post subject:  Re: Help needed in Maine

I'm the guy in Maine from the other forum. PM me with any suggestions.

Author:  Steve Marcq [ Mon Jan 26, 2009 8:44 pm ]
Post subject:  Re: Help needed in Maine

I just PM'd you his info - good luck with it!

Steve

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/