| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Advice on aligning Performax 16-32 http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20549 |
Page 1 of 1 |
| Author: | Paul Burner [ Sat Jan 17, 2009 11:22 pm ] |
| Post subject: | Advice on aligning Performax 16-32 |
I have a new (used) Performax 16-32 - and am having trouble getting the drum aligned to make a perfectly flat run. I've read the manual and have done the "loosen four bolts and turn the adjustment screw" routine multiple times - but I seem to be chasing my tail. Any advice on tricks you might know to get this aligned sure would help. Thanks |
|
| Author: | Allen McFarlen [ Sun Jan 18, 2009 1:33 am ] |
| Post subject: | Re: Advice on aligning Performax 16-32 |
This just recently on the Australian / New Zealand Luthiers Forum. Might be of a help. http://www.anzlf.com/viewtopic.php?t=1202 |
|
| Author: | Paul Burner [ Mon Jan 19, 2009 10:36 pm ] |
| Post subject: | Re: Advice on aligning Performax 16-32 |
Success!!! I followed this link that was sent to me: http://www.joewoodworker.com/performax.htm I adapted the procedure to using my standard ohm/volt meter. My 16-32 is now VERY happy - and so am I!!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|