Official Luthiers Forum!
http://www.luthiersforum.com/forum/

top questions
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20410
Page 1 of 1

Author:  rebel34 [ Fri Jan 09, 2009 8:00 am ]
Post subject:  top questions

what is the best way to cut out the sound hole, using the router i used to cut the rosette channel with or the popsicle stick method, and what is your recommended way of attaching the top to the sides.

Author:  TonyKarol [ Fri Jan 09, 2009 8:07 am ]
Post subject:  Re: top questions

If you have a router jig to do a rosette , then you are set for cutting out the soundhole ...

As for gluing on tops and backs, I use my go bar deck ...

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/